AirPods Not Connecting After Forget This Device

The seamless and easy connection between your phone and AirPods is built into their design. For this reason, when it doesn’t, it irritates me greatly. You undoubtedly tried a lot of things, like charging your case and making sure your Bluetooth connection was established, but to no avail. Ultimately, users always choose to select the “forget this device” option and attempt to connect it again, but sadly, this doesn’t always work.

You are undoubtedly here to find out how to connect my AirPods after I misplaced the device, which is why you are here. Don’t worry; after you decide to “forget the device,” I’ll walk you through the exact steps of pairing your AirPods with your Mac or iPhone in this post. So follow me through to the very finish.

Understanding AirPods and Bluetooth Technology

The wireless earbuds, known as AirPods, connect to your device using Bluetooth technology. Devices may communicate wirelessly over short distances thanks to the Bluetooth protocol. It transfers data between two devices—like your iPhone and AirPods—using radio waves.

Upon initially pairing your AirPods with your device, Bluetooth pairing occurs. The process of pairing involves the information exchange and connection establishment between the two devices. Once paired, when your device is within range and Bluetooth is enabled, your AirPods will initiate a connection on their own.

You will need to pair your AirPods with your device again in order to reconnect if you lose them. You must repeat the pairing procedure and place your AirPods back into their charging case in order to accomplish this.

It is important to remember that a variety of factors might influence Bluetooth connections, such as battery life, interference, and distance. Try the following troubleshooting steps if you are experiencing issues connecting your AirPods:

• Verify that your device is within range of Bluetooth and that it is turned on.
• Make sure your AirPods are plugged in and positioned correctly in their charging case.
• Try again after restarting your device.
• Re-pair your AirPods after forgetting about them on your iPhone.

How to Forget Your AirPods on Your Device

If you want to disconnect your AirPods from your device, you can easily forget them. This will remove the AirPods from your device’s Bluetooth list, and you will need to pair them again if you want to use them.

Forgetting AirPods on iPhone

To forget your AirPods on your iPhone, follow these steps:

1. Open the Settings app.
2. Tap Bluetooth.
3. Find your AirPods in the list of devices and tap the “i” icon next to them.
4. Tap “Forget This Device” and confirm.

Forgetting AirPods on Android

To forget your AirPods on an Android device, follow these steps:

1. Open the Settings app.
2. Tap Connections.
3. Tap Bluetooth.
4. Find your AirPods in the list of devices and tap the gear icon next to them.
5. Tap “Unpair” or “Forget” and confirm.

Forgetting AirPods on Mac

To forget your AirPods on a Mac, follow these steps:

1. Click the Bluetooth icon in the menu bar.
2. Click “Open Bluetooth Preferences.”
3. Find your AirPods in the list of devices and click the “X” button next to them.

Forgetting AirPods on Windows PC

To forget your AirPods on a Windows PC, follow these steps:

1. Click the Start button and open Settings.
2. Click Devices.
3. Click on Bluetooth and other devices.
4. Find your AirPods in the list of devices and click “Remove device.”

How Can I Fix AirPods Not Connecting After Forget This Device?

To fix the reconnecting issue with AirPods, you should first reset them. The settings differ from one device to the next (Android, iPad, iPhone, MacBook, and iPod).

If you click on the option of forgetting your device and your AirPods become disconnected, you can reconnect them by following these simple steps.

• Press the Case case button.
• Go To Bluetooth
• Tap On Your AirPods

Press the Case case button.

Once you open your AirPods case lid, press the button on the back of the AirPods case.

• Hold it until the LED flashes on your AirPods turn white.

This is a clear indication that your AirPods are now in pairing mode.

Go To Bluetooth

Then click on your Bluetooth list; for iPhone users, your AirPods should be listed under the section of “Other devices,” and for Android users, “Available Devices.”

Tap On Your AirPods

Connect your AirPods by selecting them. That’s it. It’s that easy. Your AirPods should be connected at this point.

What If My AirPods Won’t Go Into Pairing Mode?

Your AirPods may not be pairing with your Bluetooth devices for a variety of reasons. The subsequent factors could be the cause of your AirPods not being in pairing mode:

Check AirPods’ Battery

If your AirPods’ battery is low, it can interfere with their ability to link with your devices. If so, put your AirPods in the charging case and attach the charger to a power outlet or USB port using a high-quality lightning cable to make sure the charging is done correctly.

Your AirPods charging case provides an overview of your battery status in brief.

If the light turns green while the AirPods are in the case, they are fully charged. Your AirPods are not fully charged if the indicator is amber. Remember that the case needs to be charged as well if the light is amber and it is empty.

Check Bluetooth

Apple and non-Apple devices can connect to AirPods, however, they can only function when a Bluetooth signal is present. Fortunately, Bluetooth is easy to use on the majority of technical products. For example, to enable Bluetooth on your iPhone or iPad, select Settings > Bluetooth and turn it on.

Cleaning The AirPods

Take out each AirPod’s ear tips, then give them a quick rinse under running water. Avoid using any kind of soap or other household cleaning products.

To clean the tips of the ears, use a soft, dry cloth free of lint. Make sure the ear tips of each AirPod are completely dry before reattaching them.

Put each AirPod’s ear tips back in. Make sure the ear tips are aligned before clicking them back on because they have an oval shape.

Update Your Device

Should you be unable to connect your AirPods using the previously mentioned methods, there might be an issue with your device’s settings. You should be aware of the software requirements listed below for Apple devices and AirPods:

With iOS 10.2 or later, all Apple products, including the iPhone, iPad, and iPod touch, are among the most widely used gadgets. The Apple Watch requires watchOS 3, and Macs require macOS Sierra.

If you want the best possible connection between your device and AirPods, you have to upgrade your software.

Reset Your AirPods

The seamless integration of AirPods and iPhones is built in, allowing two AirPods to be connected to a single iPhone. Indeed, there are situations when it can be difficult to determine why your smartphone isn’t pairing with your AirPods.

It’s true that AirPods have the potential to become trapped in pairing mode, which results in a white flickering status light and an unresponsive charging case button. Resetting your AirPods is the first thing you should do if they aren’t connecting to your device; instructions are provided below.

In the event that your AirPods are giving you any trouble at all, you will need to reset them. This is how you do it:

• Place the two AirPods within the charging casing. Shut the cover.
• Give it half a minute before acting.
• Next, lift the case’s lid.
• Click on Settings on your device, which may be an iPad or an iPhone. After that, select Bluetooth and press the “More
• Info” button. (If Settings > Bluetooth doesn’t display your AirPods, move on to the next step.)
• Then, press “Forget This Device” once more.
• When the AirPods case lid is open, press and hold the button located on the bottom of the case. The AirPods glow white as a result, signifying that they are in pairing mode.

AirPods can be linked to a single Apple ID. If you wish to utilize another person’s AirPods (3rd generation) or AirPods Pro, they must first erase them from their Apple ID.

Contact Apple Support

As always, the most informed will be the specialists! Should those DIY solutions prove ineffective for you, you ought to contact Apple Support for assistance.

To speak with Apple Support directly, you need to dial the number that corresponds to your nation. As an alternative, you might use the internet to email or chat with support.

Fortunately, you should be able to get your issue resolved by a seasoned professional quickly because they have the best customer service rating among tech businesses and an average contract time of less than six minutes.

You’ll find it much easier to receive support if you first document all of the steps you’ve taken and the precise issue with your AirPods. This should expedite the process and enable Apple tech support to decide what’s best for you.

Reset Your Device

If the issue persists after an update, you can try restarting your smartphone to resolve AirPods sync problems. While no data will be lost, your smartphone will be reset to factory settings, so you’ll lose things like Wi-Fi passwords and backgrounds. This is a more drastic solution, so see if it helps to perform a simple device restart first.

Now, onto the two most-asked questions.

Why Are My AirPods Flashing White But Unable To Connect?

AirPods occasionally begin to flash white, but they are unable to establish a connection with the gadget. This happens because the device you’re trying to pair your AirPods with is having connection issues due to your AirPods trying to connect to previously connected devices.

Disconnecting your AirPods from all previously connected devices and then reconnecting them to your device is the best approach to resolving this issue.

In most cases, users also have problems resetting the AirPods. Now allow me to also explain why this is the case.

Why are my AirPods not resetting?

AirPods not being able to reset is an indication that something is wrong with them. If your AirPods don’t reset, you should first contact Apple Support. Then you should seek professional assistance. If you are unable to resolve the issue on your own, go to an Apple shop and purchase a new set of AirPods.

First, try to resolve the resetting problem yourself. Here’s how.

Technique 1

To deplete the battery of a wireless case, set it on a hard surface for a few days. Next, give them another charge before resetting them.

If it doesn’t work, try the second method.

Technique 2

If this doesn’t work, try charging them for two or three days. There need to be an amber light in this situation. Should this light remain illuminated, there might be a problem with the connection between your device and AirPods.