Skip links
How Do I Reset My iPad For A New Owner

iPad Won’t Turn On

Since its release, the iPad has undergone significant development and is now a huge hit. Even if it’s an amazing gadget with lots of capabilities, there are sometimes problems with it. We’ll start by discussing one of the most frequent issues: “Why won’t your iPad turn on?” If your iPad won’t power on, follow our step-by-step instructions by reading this post.

We’ll discuss the various causes of your iPad not turning on in this blog post, including low battery life and malfunctioning charging cables or adapters. Next, we’ll cover some troubleshooting advice for an iPad that won’t switch on, such as replacing the charger or submerging the device in uncooked rice if it was dropped or exposed to moisture. Finally, we will assist you in avoiding these issues entirely. Continue reading for more.

Why won’t my iPad turn on?

Now let’s discuss the reason why your iPad won’t turn on.

  • The iPad may not be turning on because its battery is fully dead.
  • Either the adaptor or the charging cable are defective.
  • The iPad is not responding; there appears to be a software issue or crash.
  • Any hardware issues, such as a broken battery or malfunctioning power button, are not functioning properly.
  • Any liquid that caused the iPad to shut down was exposed to it.

What to Do If Your iPad Won’t Turn On?

Here is how you can fix your iPad that won’t turn on:

  • Ascertain that your iPad is fully charged before proceeding.
  • Use a fresh charging cord and adapter to connect your iPad to a new power outlet.
  • Press and hold the home and power buttons at the same time on the iPad to force a hard reset until the Apple logo appears.
  • If it was near any liquid, submerge the iPad in silica gel or raw rice. After a few hours, try turning it on after leaving it there.
  • If after trying every setting, it still doesn’t turn on, there can be a hardware issue.
    For expert assistance, get in touch with the Apple Store or stop by the location that is closest to you.

iPad Pro won’t turn on

There are a number of reasons why your iPad Pro could not be turning on, but don’t worry—you can fix it with a few easy steps.

Why is my iPad Pro not turning on?

Here is why your iPad Pro won’t turn on:

  • There’s a chance the battery is dead.
  • The operating system may occasionally have flaws or glitches that prevent the iPad Pro from turning on.
  • Hardware malfunctions within the device may possibly be the source of this problem.
  • Drops, hits, and water exposure are among the damages that might stop the iPad Pro from coming on.
  • It’s possible that the gadget overheated and shut off to safeguard internal parts.

How do I fix an iPad Pro that won’t turn on?

Here is how you can fix an iPad Pro that won’t turn on:

  • After 30 to 60 minutes, plug the device into the charger and watch it work.
  • Holding down the Power and Volume Up (or Down) buttons at the same time will force a hard reset and display the Apple logo.
  • Check the device for any obvious damage and make sure the ports are clear of debris and clean.
  • Use the cord and charger with a different device to make sure they are functioning properly.
  • To upgrade or restore the iPad, connect it to a computer and use Finder or iTunes. It ought to assist with the problem.
  • If the problem continues, get in touch with Apple Support, stop by an Apple Store, or get an iPad repaired by a third-party company like Simply Fixable.

How do we prevent this issue in the future?

  • To avoid errors and malfunctions, make sure the device is running the most recent software update.
  • Try to maintain the battery’s charge between 20% and 80% rather than allowing it go entirely flat.
  • To prevent any physical damage, use a screen protector and protective case.
  • To avoid damaging the hardware and battery of the iPad Pro, keep it out of very hot or cold environments.
  • To keep the device operating properly, periodically clean the ports and screen and restart it.

iPad Pro 12.9 won’t turn on

Try using the troubleshooting methods listed above if your 12.9-inch iPad Pro won’t switch on. Regardless of the model or version you are using, there’s a good chance your iPad will have a similar issue. Thus, take note of the troubleshooting tips and seek expert assistance if the issue continues. Speak with Simply Fixable or Apple Support. They can quickly get your iPad up and running and provide specialist assistance.

iPad Air won’t turn on

Similar to other iPad versions, there may be some problems with the iPad Air. Here are a few possible causes and fixes if your iPad Air won’t turn on.

Why won’t my iPad Air turn on?

Here is why your iPad Air won’t turn on:

  • The majority of the time, the issue is really a minor system crash.
  • It’s also possible that the battery on your iPad Air is dead.
  • Occasionally, the charging cable or adapter you’re using is defective. This may make it impossible for your iPad Air to charge.

How do I fix it if my iPad Air won’t turn on?

Here is how you can fix an iPad Air that won’t turn on:

  • Restart your iPad Air forcefully if it won’t turn on.
  • Press and hold the Volume Up button for a brief moment. Next, depress and release the Volume Down button rapidly.
  • Finally, wait for the device to restart by pressing and holding the power button.
  • Just charging it will reveal the extent of the issue. As soon as the iPad Air senses current passing through its circuits, it will turn on.
  • Replace the adaptor or charging cord after inspecting it for any problems. There will be a solution to the issue.

How do we prevent this issue in the future?

  • Make sure you charge your iPad promptly and before the battery runs out entirely.
  • Update your iPad frequently to prevent software issues and crashes.
  • Use genuine charging accessories only from authorized Apple retailers.

iPad mini won’t turn on

The most frequent causes of your iPad mini not turning on are listed below. In addition, we have offered methods for both fixing and preventing these issues in the future.

Why won’t my iPad mini turn on?

Here is why your iPad mini won’t turn on:

  • The most frequent issue is a malfunctioning charger. When you utilize third-party chargers, this can occur.
  • It is particularly dangerous for people to use their iPads when taking baths. Even a single drop of water can harm your iPad mini.
  • Your iPad mini may not be turning on due to physical damage as well. An iPad mini that is dropped will either crack the screen or harm the motherboard.

How do I fix my iPad Mini that won’t turn on?

Here is how to fix your iPad mini that won’t turn on:

  • The likelihood of your iPad mini’s battery running out is significant if it won’t switch on. Thus, whenever the battery life of your iPad falls below 20%, make sure to charge it.
  • You might try resetting your iPad to see if the problem continues.
  • If you think your iPad mini may have water damage, try drying it as well as cleaning the charging port with a soft cloth.

How do we prevent this issue in the future?

  • Make sure to charge your iPad mini overnight or for at least half an hour each day.
  • Steer clear of using your iPad near a swimming pool or when having a bath.
  • Toddlers shouldn’t be given it because they will probably drop it.

If your iPad has a frozen screen, doesn’t respond when you touch it, or becomes stuck when you turn it on, learn what to do.

If your screen is black or frozen,

Follow the steps on your device.

On your iPad without a Home button

  1. The volume button nearest to the top button should be pressed and rapidly released.
  2. When the volume button that is farthest from the top button is pressed, swiftly release it.
  3. Holding down the top button will cause the gadget to restart.
  4. You may need to charge your iPad for up to an hour if it won’t switch on.
  5. If your iPad still doesn’t turn on, contact Apple Support.

On your iPad with a Home button

  1. Press and hold both the home button and the top button until you see the Apple logo.
  2. If your iPad doesn’t turn on, you might need to charge it for up to an hour.
  3. If your iPad still doesn’t turn on, contact Apple Support.

If your iPad turns on but gets stuck during startup,

If you see the Apple logo or a red or blue screen during startup, try these steps:

  1. Connect your iPad to a computer. On a Mac with macOS Catalina, open the Finder. On a Mac with macOS Mojave or earlier, or on a PC, open iTunes.
  2. Locate your device on your computer.
  3. While your device is connected, take the following actions according to it:
  4. Press and swiftly release the volume button that is closest to the top button on your iPad if it doesn’t have a Home button. The volume button furthest away from the top button should be pressed and rapidly released. To restart your device, press and hold the top button. Hold onto the top button.
  5. Press and hold both the top and home buttons on your iPad, if it has one.
  6. Hold down the button or buttons until the screen indicating recovery mode appears.
  7. Select Update when you are presented with the restore or update choice.
  8. The software for your device will be downloaded to your computer. Your iPad will exit recovery mode and you’ll have to repeat steps 2-4 if it takes more than fifteen minutes.

Try These Possible Fixes

It’s possible that a younger relative tampered with or dropped your iPad, causing it to freeze and go blank on its own. No matter what you attempt, your iPad will not come on, regardless of how it happened.

Don’t worry if you’re trapped right now and yelling in desperation, “My iPad won’t turn on.” Your iPad may get stuck on the Apple logo or won’t switch on for a variety of reasons. Here’s what to do if your iPad won’t power on, regardless of how it happened.

How to Fix an iPad That Won’t Turn On

Charge Your iPad

Charging your iPad is a smart place to start if it won’t switch on and is stuck on a black screen.

A dead battery is one of the most frequent causes of an iPad that won’t switch on. Your iPad will not be able to switch on at all if it is dead.

Charge your iPad first. If this isn’t functioning, check to see if the charger is plugged in and compatible with other devices. A malfunctioning charger may be the only thing at fault.

It’s time to attempt some of the other fixes on this list if your iPad still won’t power on even when plugged in.

Adjust the Brightness

It’s possible that your iPad is already turned on, but you can’t see the screen because the brightness has been lowered. This is especially likely to happen if you recently leased your iPad to someone who may have changed your preferences.

The issue with this is that if you can’t see, you can’t change the brightness levels. Try asking Siri to brighten the screen to see if it fixes the issue. You should be able to get your iPad back up and running quickly if Siri answers.

Try Third-Party Software

Your best option may be to attempt using third-party software to resolve the problem if none of these alternatives have been successful. A third-party tool called ReiBoot – iOS system repair can diagnose and resolve more than 150 iOS system issues.

It updates the version of iOS as well, and it does all of this without posing a data loss risk. This is how you apply it.

  1. Launch ReiBoot after installing it.
  2. After putting your iPad in recovery mode, link it to your PC.
  3. On the ReiBoot program, click the green “Start” button.
  4. Select the Standard Repair option to guarantee that your user data is kept.
  5. After the download is finished, click the option labeled “Start Standard Repair.” These two could require some time.
  6. After the procedure is over, your iPad ought to be operational once more.

Try a force restart or a hard reset.

As an alternative, you can attempt a hard reset, or force restart, on your iPad. All you have to do to accomplish this is hold down the power and home buttons until the Apple logo appears.

The procedure is a touch more involved if you have a more recent model—like an iPad Pro—that won’t power on. You must quickly press the power button until the Apple logo appears, then press the volume up and down buttons.

Put Your iPad Into Recovery Mode

Alternatively, you may attempt to enter recovery mode on your iPad. This enables you to attempt repairs by plugging it into your computer. Your iPad Pro won’t switch on, for example, so you’ll need to follow a different approach than for a regular iPad. The process may vary depending on your model.

Still, you might want to proceed cautiously at this point. Your initial reaction might be to select Restore if your iPad won’t power on and you connect it to your computer in recovery mode. This is typically only helpful as a very last option because it will erase all of your data while fixing your iPad.

Upgrade Your iPad

Updating your iPad is another thing you can attempt if it won’t turn on. However, if your iPad won’t turn on or is stuck on the Apple logo, this can be challenging. Using the previously stated ReiBoot application to upgrade your iPad is one approach. Although there is a slight possibility of data loss when using this method, it is generally advised as a last resort.

Contact Apple Support

It could be time to get in touch with Apple Support if you’ve tried all of the aforementioned fixes and your iPad still won’t switch on. This indicates that the problem is most likely hardware-related, meaning that someone will need to physically open your iPad and adjust the component that is malfunctioning.

Leave a comment

We don't buy stolen phones. All phones are sold by people who have the right to sell them.

This will close in 0 seconds